The 2009 ICC/ANSI Standards require that soap dispenser controls and faucets that serve certain accessible lavatories - larger restrooms determined by scoping such as IBC as to require an enhanced reach range - need to be installed with a reach depth of 11 inches (280mm) maximum.
The HS basins are also bowl options in Bradley's prefabricated, solid surface Omnideck Lavatory Product Line. The Omnideck Revit Family Library can be downloaded from the same page as the HS Undermount Basins. Custom Omnideck Revit families with the HS basin bowl options available upon request.
Today's innovative buildings' exteriors and interiors are not always designed as orthogonal or linear --which prompted the design options of the Bradley's lavatory deck systems.
Bradley Corporation developed an innovative manufacturing processes to create "molded shapes" from engineered stone (natural quartz and granite) to accent linear design or complement the parabolic curves, arcs and elliptical features within the design interiors.
Advocate Serves as Key Component to Safer-Cleaner Toilet Room Design
The distance that separates the hand-washing area and from the hand-drying area; creates a major liability (risk) from a wet slippery floor for users within a toilet room design. The Advocate's hand-drying system is fully integrated with the hand-washing basin to minimize or eliminate water dripping onto the floor. Providing both a safer and cleaner toilet room design.
After downloading a Bradley Revit Family, review the model's Detail Level [Coarse-Medium-Fine] in a Revit project file.
Review the level of detail displayed in each Revit model view: elevation, plan and section views.
You will see more detail in these views as you cycle through your view settings of Coarse-Medium-Fine.
We realize that smaller print scales (1/8" = 1'-0"), require less detail (COARSE) for better print outs.
As you create views for larger print scales (enlarged plans, interior elevations); Bradley Revit Families provides more detail that will remain legible with heavier pen settings.
Each component (symbolic line, model line, solid, masking region) in a Bradley Revit Family, is assigned a detail level and visibility setting. They are fully customizable, so you can match our Revit components to your Revit-BIM graphic standards.
Revit Rendering and Walk-Through Tip
BEFORE you render a Revit View or play/export a Revit Walk Through, please set the view's Detail Level to FINE to view all of the 3D components inside the Bradley Revit family.